Live chat by BoldChat
  Steam Showers
  Infrared Saunas
  Whirlpool Bathtubs
  Shower Panels
  Bathroom Vanities
  Modern Toilets
  Steam Generators
  Walk In Bathtubs

Read about Brilliant Showers' A rating in the Better Business

ThermaSol ProSeries PRO-1150 Steam Generator

product image
Our PriceUS$4,860.00
Retail PriceUS$6,000.00
Model:PRO-1150 Steam Generator
Dimension: 17"L x 11 1/2" W x 12"H


Digital CAN-bus Technology Steam Shower Generator with Patented SmartSteam

ThermaSol ProSeries Pro-850 Steam Generator
Generator up to 1150 CF / 30 kW

Control and steamhead sold separately as kits


Unit: 17 L x 11-1/2 W x 12 H
Pan: 18-1/2L x 13-3/4W x 2 H

* Lifetime factory parts warranty
* 3 year in-home warranty prior to lifetime factory warranty
* Digital CAN-bus net worked system, intelligent two-way communication

* FastStart steam in seconds... not minutes
* Auto PowerFlush Pressurized inner tank cleaning system

* Constant steam at a constant rate
* Can be plumbed 50ft. from the shower without up-sizing the generator
* Stainless steel drain pan

* Stainless steel construction
* Superior heating elements - low watt density
* Split tank technology enhances performance and life-span
* Water tight data link cable for control
* Works with ThermaSol Serenity light & music system
* SmartSteam No irritating temp fluctuations-Perfect temp maintenance Patented
* Stainless water flex connector
* Pre-plumbed pop safety valve
* 1/2" union to connect to steam line

Control and steam-head sold separately as kits


Ampere Chart Specs

Model - Classic-Series MMS- 1150 Steam Generator
Max Room Size (cubic Feet) 1150
KW – 30KW
Input Voltage - 208V - 240VAC Single Phase
Maximum Amperage – 138Amps
Electrical Connection – Hardwired

Location and Installation
- Select a location as near as practical to the steam room, within 50 feet.
- Install steam bath generator in an upright position only.
- Provide a minimum of (12) inches at both ends and top of the steam generator or as required for servicing.

Required Plumbing
- Water Inlet - 3/8" NPT Compression
- Steam Outlet - 1/2" NPT
- Drain Pan - 3/4”NPT
- Safety Valve – 3/4”NPT

*Locate steam head 6 -12 inches above floor
*For tub/shower enclosures, install 6 inches above tub top edge

All electrical wiring to be installed by a qualified licensed electrician in accordance with National Electrical code.

Power Wiring
1. Check power voltage. Use 240V rate unit when supply is greater than 208V. (Most homes have 240V, 1PH service). Use 208V rated unit for 208V power.
2. Use minimum 90C/300V rated insulated copper conductors only, type THHN or equal sized in accordance with National Electrical Code and local electrical code for the Amps in Ampere Chart. If allowed by code, NM cable may require a larger wire size than as listed on the chart.
3. Connect suitably sized equipment grounding wire to ground terminal provided.
4. Install a separate circuit breaker between supply and unit. Provide a power supply disconnect within sigth of the steam generator or one that is capable of being locked in the open position.
5. For single phase units, use two-wire supply source and equipment grounding wire. Neutral (white) wire is not required.

More Pictures:


Signature Series Kit:
• Time and temp
• 2 memory settings
• Last setting memory
• Operates Auto PowerFlush™
• Day clock
• Light and music system
• PVD plating technology
• 14 finishes
• Enhanced diagnostics

Contemporary / Traditional
Polished Chrome - $760
*Other Finished - $819

Temp-Touch Plus Kit:
• Temp Control
• Pre-set timer control
• Last setting memory
• Operates Auto PowerFlush
• Light and music system
• PVD plating technology
• 14 finishes
• Enhanced diagnostics

Contemporary / Traditional
Polished Chrome - $544
*Other Finished - $624

*Other Finished:
BN - Black Nickel
ORB - Oil Rubbed Bronze
PB - Polished Brass
COP - Polished Copper
PN - Polished Nickel
WHT - White